Відео

you have a little spacer next to your big tweezers when does that go? I took my machine apart and cleaned it and oiled it, this little spacer fell out of my machine and i can not figure out where it goes ?

Yes, a real life saver for me. Thank you so much

Kevin, you are amazing at teaching us how to do this stuff with our own machines! I had a problem awhile back with my upper and lower tensions and managed to find a groove in the needle plate. I filed it smoother with a metal nail file and it did ok but I was still having a problem with jamming so I ordered a new plate finally. THEN I lost one of the screws trying to replace the needle plate! SO, I began to take the machine apart to find that screw. I kinda tilted it upside down and back and forth before I did that. But I quit hearing it move around so I took it apart. I had not seen this video yet. I only saw the one showing how to service the machine. I ended up finding the online service manual and downloaded it to help me figure things out. It helped a lot except it didn’t show where and what kind of screws go back where. After I took that free arm slab thing off, I thought I would never get it back on but I finally managed to miraculously do it! Now I see you address removing that part in this video! However, I’m finding that I am missing a few screws (in more ways than machine wise! Hehe). So I am writing this long winded comment to ask if I am able to order replacement screws anywhere before I take this free arm slab off again to do the adjustments you describe here? My upper thread is not catching at all or even trying to catch. IT just spins around and around when I turn the handwheel. So I will try to be patient and see if you’re able to let me know if and where I can possibly order replacement screws. Either that or maybe I should buy another new machine? I already bout a singer 1500 that I dont like at all. If I take it back they will charge me to rebox and for Re shelving. I have people I can sell it to or give it to cuz I don’t like it at all. It makes me LOVE my HD 4423!

Can’t wait to get home and try this. This could be a game changer!!

Do I cut the sleeve one half inch longer then finished length and also cut the lining the same?

Still not slow enough, this machine is a real pain in the rear for that

Você tem vídeo ensinando a abrir a máquina? Singer heavy duty 6705

I feel ready, thank you so much for this very educative tutorial

can't find any videos of somebody removing that hand wheel cover

the footswitch that came with my 4423 does have the pot but adjusting it only slows down the start just slightly. it's not same as having a 6800C with speed control. i've been using variable speed current control to achive somewhat slower speed at fully pressed pedal. again not as good as built in speed control that slows the speed completely at maximum foot pedal pressure.

Can you help me please? My bobbin case started to move a bit. I pulled it out to check and it came apart.... I have all the pieces.. two screws, the long silver piece, the long black piece, a tiny black oblong piece and the smaller silver piece. I cannot figure out how to put it back together!! Is there anywhere that shows me how? I have had the machine less than a year. Thank you. Any input is appreciated!!! Model Singer Heavy Duty 4452

My hero ❤

This is the shittiest tutorial I have ever seen. “This goes in that then spins around the bobbin then goes over top that” meanwhile the camera is on a shelf across the room showing us this man’s sausages for fingers. 1/10 tutorial

Thank you Kevin. This was so helpful, a game changer for me. I had been really concerned about the fast speed. Great help. Judy

Great tutorial Kevin, I bought this machine a couple of years ago but couldn't take to it. But after having a few classes and watching your tutorial my confidence has grown and I'm sewing practically every day.

Can you help me, please? Why does the needle thread hold in the bobbin case?

Hi Kevin I am a fan watching your video I love sewing I have a heavy duty singer sewing machine the bobbin thread is very loosen birdnest how can I fix it on my own I need your help

That's the problem with computerized machines. I have the 4423 and it even goes through few layers of 3-4 oz leather with no problem.

This is so great! Thank you! But now my feeder dogs get stuck down. I can go into the bottom and pop the gear back to release them, but then they get stuck down again. I think I messed something up while I was in there fixing the bobbin.

Thank you Could you by chance show the needle bar clap you adjust? In the manual there’s an upper one that my machine doesn’t seem to have. I’ve gotten it working though more or less, but have noticed since correcting the timing, my tension wheel has to be substantially higher. Before I’d regularly use it around 5, and. Im having to use it almost fully maxed out around 7/8. Is there a way to internally adjust the tensioning?

Thread upper and lower in different pls tell my home

Kevin, thanks so much for this video explaining how to slow down a singer foot pedal. Although we have 220v in India and i have an 8280 model. I had to turn the speed control clockwise to make it slower. But this great! I can finally sew slowly which is really helpful for a beginner. A big thank you!

It helped me today too! almost 10 years after the initial video was uploaded.!

What about if I loosened screw but still no change in stitch length.😢

Thank you so much for being the greatest teacher, got to thread on my own for the very first time without anyone's help, 😊.

This was quite helpful.Thank you

Thread isn’t attaching to the material

Nice .. Love it!!!👜🧵🪡

SAVED MY LIIIIIFE! THANK YOU!! 🥹🥹🥹

Kevin sir thank you so much for this video. It was so helpful and easy to follow that i don't feel worried to try and fix this issue myself.

I like how you take your time, especially for us who are learning 😊

How did you ever get that thick thread thru such a tiny needle? My needle eye is so tiny, I can barely get it threaded. Thanks so much. I’m a newbie, so much to learn.

How about 7256?

Can't thank you enough for this help! My new Singer Promise was consigned to the cupboard a few years ago after my first efforts failed dismally, but I recently decided to try again, and use Google to help me which led me here. I'm now producing cute little stuffed puppies in all sorts of fabrics! 😆 Thank you!

This is the most in - depth explanation of sewing elastic together like this. Using the different widths makes sense. TYSM for sharing this video with us. 👍😀

I have some what the opposite problem I want my 4423 to go faster

I have been fighting a problem with straight thread on the bottom of the stitch for years! No matter how low I put the top tension, the bottom of the stitch was just straight thread... not pulled up at all. After I turned the yellow screw a about a quarter of a turn back I finally have a decent stitch on both top and bottom. Do you give classes on using sergers? Hahahahaha!

awesome

The “tension” spiel was the most convoluted, laughably confusing gobbly gook I’ve ever sat through. Redo your explanation of the dials.

Thank you very much

Thank you so much!!

The metal piece that goes to the left of the black bobbin tooth (but screws on the right side) do you know what that part is called?

what setting is your machine on to stitch

Nice demonstration but I wish you included also needle positioning. I can not find anywhere information whether needle position is only center, left and right or it is linear / continuous from side to side.

How would I know whether to tighten or loosen the bobbin case please? What does the bobbin tension actually do to the thread in the bobbin? I have a sewing machine which is not linking the top and bottom thread together so i'm wondering what the issue would be.

Estoy en México no se Inglés por favor en español me interesa

Kevin, you did an amazing video, and your patience and ability to explain are awesome. I have a Singer cg500 which is pretty similar however I see no obvious way to adjust underneath. If you are familiar with the 500 series, could you share tips on the way to adjust underneath? Your blessings are stored in heaven for all those you have helped!

Lining needs slack!

The foot has a hole where you can insert a screw driver to turn the speed adjustment without opening it!

How can these tools by?